다른 유형의 잔디 깎는 기계 블레이드

There are different types of 잔디 깎는 기계 available on the market, each with various features. 

lawn mower blade manufacturers

귀하의 요구를 충족시키는 정확한 잔디 깎는 기계를 선택하는 것은 어려울 수 있습니다. 그들에 대한 필요한 정보를 얻지 않고 그렇게하는 것은 바보 같은 것일 수 있습니다.

Each lawn mower specializes for particular terrain and landmass. The features and designs also vary in each of them. 

그러나 가장 적합한 잔디 깎는 기계를 구매하는 데있어 가장 중요한 부분은 다른 유형의 다른 유형에 대한 적절한 지식을 갖는 것입니다. 잔디 깎는 기계 블레이드.

따라서이 기사는 모든 유형의 잔디 깎는 기계 블레이드의 장단점을 포함 하여이 특정 기능에 대한 자세한 토론을 제공합니다.

  1. 표준 또는 중간 - 리프트 블레이드
  2. 낮은 - 리프트 블레이드
  3. 높은 - 리프트 블레이드
  4. 멀칭 블레이드
  5. 게이터 블레이드

 

1. Standard or Medium-Lift Blade

Standard or Medium-Lift Blade

These are the type of blades that are generally used in standard lawn mowers, mostly the ones that rotate horizontally. 

They are often called straight mower blades, but they tend to have a slight curve on each end. 

Lawn mowers that discharge the grass debris sideways are usually equipped with blades of this kind. 

Due to the slight bend at the ends of medium-lift blades, it lets a bit of air ventilate through. 

This creates a sort of suction on the land, pulling up the grass so you can cut it precisely. Regular blades create only a minimal suction because the edges are not overly tilted. This only allows a small amount of air to pass through.

However, 이 특정 종류의 블레이드를 선택하기 전에 고갈해야 할 몇 가지 요소가 있습니다. 가장 중요한 요소는 당신이 깎는 땅의 유형입니다.

Although most people prefer this blade due to its high efficiency on both dry and damp surfaces, we recommend it only to use if your yard has thick patches of grass. 

Standard blades can rapidly cut dense grass and send it to the bagging with ease. 

On the other hand, they might not be able to remove the smaller clumps of grass from your yard, leaving you with an uneven lawn. 

따라서 마당에 가벼운 잔디가있는 경우이 유형의 칼날을 사용하지 않는 것이 좋습니다.

Accordingly, medium blades might also present you with another dilemma along the way. As the blades are only slightly curved, the amount of suction created is minuscule. 

The suction is enough to straighten grass for trimming but not enough to efficiently send the debris through the chute and into the bag. 

As a result of this low suction power, the debris clutter up and eventually block the chute. This clog will, unfortunately, restrict the debris from being stored into the bagging. 

또한 잔디 깎는 기계가 작동을 멈추거나 심지어 더 나빠질 수 있습니다.

프로

  • 곡선 가장자리는 흡입을 만듭니다
  • 밀도가 높은 잔디 패치를 쉽게자를 수 있습니다
  • 모든 토양에 적합합니다

단점

  • 종종 낙하산을 막고 저장을 제한합니다

2. Low-Lift Blade

Low-Lift Blade

Low-lift blades are specialized for mowing on sandy soil due to their low suction power. The edges of the blades are even less curved than the standard one. 

The low suction doesn’t enable the grass to be lifted too high. This lets the grass stay fairly grounded enough to be trimmed and discharged sideways. 

동시에, 흡입은 먼지가 상승하기에 충분하지 않습니다. 따라서 숨을 쉬는 공중에서 퍼지지 않고 땅에 정착합니다.

Low-lift blades are usually 3-4 inches in size and require less power from your lawn mower. As it doesn’t strain the engine too much, your lawn mower is granted a longer lifespan. 

Blades that apply more suction deteriorate much faster than low-lift blades. 

The dust often settles into the deck, causing the blades to wear out before their designated expiration dates. 

So, if you rely on long term durability, these blades are certainly your best choice. Low-lift blades are also suitable for their ability to work silently. 

효과적으로 기능하기 위해 많은 전력이 필요하지 않기 때문에 많은 소음이 없습니다.

프로

  • 기능 할 수있는 전력이 적습니다
  • 조용하고 효과적인 잔디 깎기를 허용합니다
  • 모래 지형에 적합합니다
  • 장기 내구성을 보장합니다

단점

  • 파편을 포장으로 빨지 못합니다

 

3. High-Lift Blade

High-Lift Blade

가장자리에 특정 수직 각도로 높은 - 리프트 블레이드를 쉽게 구별 할 수 있습니다. 이렇게하면 블레이드를 통한 최대 공기 흐름이 가능하며 다른 수직 흡입을 생성합니다.

The fast circular motion of the blades makes the grass taut and ready for a perfect trim. Thus, it allows you to cut your lawn to utmost precision, giving it a fresh and defined finish. 

High-lift blades range from 1-21 inches in length and are best suited for yards with tall grass. 

The high level of suction makes sure there is no accumulation of grass in the chute, preventing blockage. 

As a result, people who prefer bagging lean towards these sorts of blades. 

However, this feature also makes this unsuitable for mowing on sandy terrains. Due to maximized airflow, the blades tend to suck in the sand and dust along with the grass. 

As we know, dust can settle inside the deck of the lawn mower, which causes it to wear off prematurely. 

또한 블레이드의 빠르고 연속적인 회전은 더 많은 흡입을 만들기 위해 더 많은 전력이 필요합니다. 마찬가지로, 이것은 예상보다 일찍 잔디 깎는 기계를 손상시킬 수 있습니다.

프로

  • 잔디밭에 더 우아한 마무리를 제공합니다
  • 남은 잔해물을 빨고 저장합니다
  • 키 큰 풀을 자르기에 적합합니다

단점

  • 전원을 위해 엔진을 배출합니다

 

4. Mulching Blade

Mulching Blade

If you wish to replenish the soil using the grass debris, instead of just discarding it, you need a mulching blade. 

You can find mulching blades in push or riding lawn mowers. They are multipurpose blades, often known as 3-in-1 blade. These blades have more distinct and curvier edges. 

그들은 또한 다른 칼날보다 더 잘 자르는 모서리를 가지고있어 잔디를 더 미세한 조각으로 자르고 땅으로 다시 배출 할 수 있습니다.

Mulching blades create less suction but can still straighten the grass and trim it. 

As these blades have more curves on their inner and outer surface, the trimmed grass is then transferred to the deck. There they are cut into even smaller pieces, and the innermost curves allow the particles to settle into the ground. 

So, the finer the grass, the more efficiently the nutrients can be absorbed by the soil. Mulching is the most productive way to recycle unwanted debris. 

However, the low suction power of these blades makes them unsuitable for cutting tall, dense grass. Dense patches of grass can’t be cut efficiently and can end up clogging the deck.

프로

  • 세 가지 다른 목적으로 동시에 사용할 수 있습니다
  • 블레이드에 몇 가지 곡선이있어보다 뛰어난 절단이 가능합니다.
  • 영양소로 토양을 풍부하게합니다

단점

  • 밀집된 잔디는 갑판을 막을 수 있습니다

 

5. Gator Blades

Gator Blades

Similar to mulching blades, the gator blades are perfect for fertilizing your soil. In fact, gator blades are modified to do the job more efficiently. 

블레이드는 잔디에 최대 흡입을 생성하도록 특별히 설계되어 위로 끌어 당깁니다.

이것은 멀칭 칼날의 치아에 특정 각도 때문입니다. 그것은 모든 잔디를 정확하게자를 수있는 방식으로 잔디를 위로 당기는 보조 칼날 역할을합니다.

게이터 치아의 독특한 각도는 모어가 계속 움직일 때 잔디를 날카로운 절단 가장자리쪽으로 계속 밀어 붙입니다. 이것은 작은 잔디 조각을 계속해서 절단 할 수있게합니다. 큰 잔디 조차도이 칼날로 쉽게 잘라낼 수 있습니다.

이 과정에서 최선을 다하려면 멀칭 키트를 블레이드에 장착 할 수 있습니다. 멀칭 키트는 지구에 균일하게 정착하기 위해 미세한 잔디 조각을 배포하는 데 도움이됩니다.

미세한 잔디는 토양에 필요한 영양분을 제공합니다. 이렇게하면 마당에서 꽃과 과일을 키우려고한다면 결과가 크게 향상됩니다.

You can also collect all the chopped pieces in a grass collector bag. This will save you the time and effort of cleaning the yard yourself. 

또한 마당을 훌륭하게 보이게하는 데 기여할 것입니다. 따라서 두 가지 방법 모두에서 혜택을받을 수 있습니다.

프로

  • 구부러진 이빨은 잔디를 위로 당깁니다
  • 수정 된 블레이드는보다 정확한 절단을 허용합니다
  • 깨끗하고 환경 - 친절합니다
  • 토양 수정에 적합합니다

단점

  • 절단 가장자리는 빠른 속도로 둔화 될 수 있습니다

후 시간 : 4 월 - 23 - 2022

후 시간 : 11-10-2023
  • 이전의:
  • 다음: